Building

InspectorMarshall Lind

BRACED WALL INSPECTION ONLY OK

InspectorMarshall Lind

BRACED WALL INSPECTION, Need to meet required nailing schedule, 4" edges & 8" Field, Call for re-inspection, Talked to contractor on site

InspectorBrian Stemwedel

Check separation distance between 917 and 921 and make sure it is a min (or exactly 10' apart) if exterior walls are closer than 10', then per Table 602 MSBC 1 hour fire resistance rating is required from both sides [705.5 MSBC] distance is measured to lot line between buildings. if less than 5' from property line, then openings are also limited to 15% of exterior wall area

InspectorBrian Stemwedel

looking at firestop system, noted 3" pvc installed w/out fire collars. Verify via approved firestop details this is acceptable. Additionally, at 3" pvc, annular space was not symmetrical, if elimination of Fire collar is acceptable verify annular space requirements are in compliance

InspectorBrian Stemwedel

Fnd waterproofing approved (emulsified asphalt) told Randy that i would accept pictures of R10 rigid foam fnd insulation

InspectorMarshall Lind

Rebar per plan OK

InspectorMarshall Lind

Poured wall forms & rebar not ready, Call for re-inspection, Talked to GC & concrete forman

InspectorMarshall Lind

Strip, Rebar per Structural, UFER rods tagged, Clay/Sand, Dry, 55 Degrees